EasyCardTCG Scan

Tell normal and reverse holo cards apart

Look at where the card shines

On a reverse holo card, the shine appears on the card outside the illustration. With cards from Scarlet & Violet or Mega Evolution, working out whether you have a normal or reverse holo card can take time. Listing the wrong finish can lead to a return.

Set the card down where you can look at it closely. Start with an area outside the illustration that you can see clearly, such as the space around the card text. Tilt the card slightly and look at the same area again. Describe where you see the shine. You now have a concrete observation to use when choosing between normal and reverse holo.

If a card remains unclear, set it aside so you can revisit it. Keep the physical card close and make a note against the image if that helps. Return to it when you have a suitable card for comparison, before you record the finish for sale.

Compare the physical cards side by side

If possible, find two cards with the same set, number and language whose finishes you can compare. Lay them side by side in the same direction. Look at the same area outside the illustration on both cards and tilt them together. Ask yourself whether you can see the same thing on each card. If useful, swap their positions and make the same comparison again.

Write a short note about what you saw in your own words. Describing where you noticed the shine gives you something more specific to check later than a tick on a sheet. Keep a clear example from your own stock as a reference and set aside the card you are unsure about. If you cannot find a suitable reference, leave the finish open for the moment and carry on with the cards you can place.

Give each stack a clear place

Before you start, decide where you will put normal cards, reverse holo cards and cards you want to look at again. Put clear labels next to the cards. If you are working through different sets in one session, keep the stacks distinct. You want to be able to work out which physical card goes with an image or a note when you prepare your listing.

For a trial stack, keep the cards in the same sequence while you review the images. Place uncertain cards at the end or keep them apart with a note referring to their place in the stack. For your own check, you can compare the cards again after a break and update your earlier notes.

Make the call in EasyCardTCG Scan

EasyCardTCG approves a card automatically only when the set, number, language and finish are certain. If the finish is unclear, the card goes to Needs review. You make the decision there.

When a card needs a second look, open it and find the physical copy. Look again for shine outside the illustration and use another card from the same set as a reference if needed. In a test, note any examples that were difficult to compare. Describe what you could see on the card and what information you needed to make your decision. That gives someone without the cards in front of them something specific to discuss with you.

Finish by checking a card you set aside earlier. Record the result using the words you plan to use in your listing. That gives you a consistent label to look for in your final check.

Frequently asked questions

Where should I look on a reverse holo?

Look outside the illustration. That is where a reverse holo shines.

How do I compare two finishes?

Lay the cards side by side in the same direction and tilt them under the same light.

What happens when EasyCardTCG is unsure?

The card goes to Needs review, where you check the finish yourself.

What if I am still unsure?

Set the card aside and take time to compare it with a clear example before listing it.