Document scanner or phone app?
Start with the stock you process
If you already have a suitable smartphone, a phone app may be an option without buying separate scanning equipment. Photographing individual cards can be convenient for small quantities. With a document scanner that has a feeder, you put in a whole stack at once. Consider that approach if you handle hundreds or thousands of cards per week.
Look at the cards you actually intend to list this week. Do they come in as singles you handle between other tasks, or do you usually prepare a whole stack for the same channel? Write down when you do the work, where you put the cards and what you do with the images afterwards. Pick an example that resembles your usual working day.
EasyCardTCG Scan currently works only with a document scanner.
Consider the recurring work in both approaches
Walk through your phone routine first. Decide which cards to capture, where you will find the images afterwards and when you will check the card details. Note what you find convenient about working on cards individually. Think about whether you have to pause other tasks while taking photos, for example sorting your stock or looking up details for a listing.
Next, walk through the same process with a document scanner in mind. Think about where you put the stack, how you keep the images for each session together and where you leave cards you want to check again later. Include the steps after capture. Use the same end point for each comparison, such as the checked sales list you actually want to use.
If you handle both singles and stacks, consider the two situations separately. Decide in advance which cards you would use with each approach and why. Then see whether that choice suited the batch in practice after the trial.
Factor in your equipment and costs
For EasyCardTCG Scan, we tested with the Ricoh/Fujitsu fi-8170, capturing card fronts in colour at 300 dpi.
Think about the space you have on your work surface and where your cards will go if you need to do something else partway through. If you already have a scanner with a feeder, tell us the model when you apply for the closed test. Describe how you save individual colour images of card fronts in a folder. If you are considering a purchase, see whether you can assess the workflow with a trial stack first.
Measure your own workflow before choosing
We will measure time savings across the whole workflow in the closed test.
Choose the starting and finishing actions before you run your own comparison. Record the time you spend preparing, capturing and checking cards and getting a sales list ready. Note which cards you had to fetch again and when you wanted to replace an image. This gives you something concrete to discuss when you look at where your time went.
Read your notes after the trial and decide what matters most to you. You might want to work through a stack at a regular time. You might prefer to keep small quantities up to date in between other work. Start with the kind of work you do most often and see which approach feels easiest to repeat for it.
Frequently asked questions
Can I use my phone for EasyCardTCG Scan?
EasyCardTCG Scan currently works only with a document scanner.
Which model was tested?
The Ricoh/Fujitsu fi-8170, with card fronts captured in colour at 300 dpi.
How much time could I save?
We measure that in the closed test, from scan to sales list.
How do I compare the two approaches myself?
Use a representative stack and the same finishing point. Include the time spent on preparation, review and the sales list.